2025 Gradall Aluminum Mill Maintenance Machines XL 4240 V

Information

2025 Gradall Aluminum Mill Maintenance Machines XL 4240 V

UNIQUE GRADALL BOOM MOVEMENTS FOR EFFICIENT ALUMINUM MILL MAINTENANCE

Booms articulate to work inside furnaces

On crawler or rubber tire undercarriages, Gradall aluminum mill maintenance machines have articulating booms with unique movements to reach through the furnace mouth to skim dross and maintain furnace walls and bottoms. Horizontally, the boom can raise 29 inches. Boom will tilt 8.1° above grade and 19° below grade.

Features may include:

CHASSIS DESIGN
  • Triple grouser crawler excavator pads available in a choice of widths enhance tracking ability, with high range travel speeds up to 3.4 mph
  • Crawler or rough terrain rubber tire undercarriage
  • On crawler models, dual range high torque piston motor powers each track, along with three-stage planetary drive, integral speed limiting valve and automatic spring-set hydraulic release wet disc parking brake
BOOM
  • Heavy-duty boom rollers, along with an exceptionally rugged boom
  • Roller assembly can be removed for easy maintenance
  • Level working height is adjustable
ADVANCED SYSTEMS
  • Legendary Bosch Rexroth design and reliability
  • All new, modern high-pressure hydraulic system is electronically controlled with pressure-compensated, load-sensing valves
  • Combined electrical system for chassis and excavator delivers advanced, effective operation
PERFORMANCE
  • Heavy frame for lateral support
  • Heavy boom cradle
  • Crawlers have thicker grouse pads for work at the side of the carrier

Photos

Highlights

  • Exeter, Rhode Island
  • 2025
  • Gradall
  • Aluminum Mill Maintenance Machines XL 4240 V
  • Available

Specifications

  • 2025
  • Gradall
  • Aluminum Mill Maintenance Machines
  • XL 4240 V
  • Crawler
  • Volvo TAD571 VE, Tier 4f
  • 173hp @ 2200 rpm (129kW) 590 ft lb torque @ 1100-1500 rpm (800Nm) | Net Rating: 153 hp @ 2200 RPM (114kW)
  • Inline 4 cylinder
  • 24 volt
  • Two SAE #C31-S 1000 CCA
  • 100 amp alternator
  • 4 cycle
  • Travel Speed: High Speed: 3.4 mph (5.5 km/h) / Low Speed: 1.9 mph (3.1 km/h)
  • Rated Boom Force: 11,000 lbs (48.9 kN)
  • One load-sensing, axial piston pump; oil flow: 0-110 gpm (0-416 L/min) | Gear pump: 6 gpm (23 L/min)
  • Bearing: 8.0 psi (55.9 kPa) | Hoist: 4,900 psi (331 BAR) | Swing: 4,200 psi(290 BAR) | Telescope :4,900 psi (331 BAR) | Propel: 4,900 psi (331 BAR) | Pilot System: 550 psi (38 BAR)
  • Pad Size: 31.5’’ 800 mm / 23.6” 600 mm | Maximum slope: 30°
  • 65 gallons (246 L)
  • Tank: 82 gal (310 L)
  • 67,500 lb (30,617 kg)