2025 Caterpillar Telehandlers TL1055

Information

2025 Caterpillar Telehandlers TL1055

CONFIGURED FOR SUCCESS

The TL1055 is precision engineered to handle any task, offering stability, maneuverability, speed and power in any application.

Features may include:

Intuitive Control Layout
  • All day operator comfort and efficiency is ensured through our simple, logical control layout.
Easier Access
  • Cab entry and exit is both easier and more convenient due to the well placed handholds.
Operator Protection
  • The machine provides full operator security with OROPS or EROPS protection.
Enhanced Visibility
  • The TL-Series cab has improved visibility due to the use of advanced virtual design techniques.Show Less
Joystick Control
  • The joystick allows three simultaneous boom functions and operates the auxiliary hydraulic function. It allows the option of a second auxiliary service for the use of work tools that require more than one hydraulic service.
Flow Sharing
  • Three simultaneous hydraulic functions are achieved using a full flow sharing hydraulic valve. A load sensing variable displacement pump allows full hydraulic power even at low revs.Show Less
Lift Height
  • The TL1055 can effectively pick and place materials to a maximum height of 54.9 ft. (16.7 m).
Reach
  • Job site obstacles present challenges demanding a machine to place loads at greater distances - the TL1055 delivers.
Maneuverability
  • The TL1055 offers improved maneuverability, allowing it to work productively in confined areas.
Steering Modes
  • The TL1055 offers three steering modes (two wheel, crab and circle steer) to allow an operator to more easily position the machine. Steering modes are selected by a single three-position rocker switch. Steering position sensors are fitted as standard to all steering modes to be changed while moving.Show Less

Photos

Highlights

  • Exeter, Rhode Island
  • 2025
  • Caterpillar
  • Telehandlers TL1055
  • Available
  • 8 ft
  • 8.16 ft

Specifications

  • 2025
  • Caterpillar
  • Telehandlers
  • TL1055
  • General
  • Model: Cat® C3.6L
  • Gross Power - Basic: 73.7 hp | Gross Power - Premium: 111 hp
  • Meets U.S. EPA Tier 4 Final emission standards.
  • 370/75-28 Duraforce Air
  • 370/75-28 Duraforce Air
  • Spring-applied hydraulic release on front axle
  • Service Brakes - inboard wet disc brakes on front and rear axles; Parking Brakes- spring-applied hydraulic release on front axle
  • Travel: 18 mile/h
  • Boom Up: 9.9 s | Boom Down: 8.5 s | Tele In: 14.6 s | Tele Out: 14.5 s
  • Drawbar Pull - Basic: 22619 lb | Drawbar Pull - Premium: 25589 lb
  • Cubing Forks: [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in) | Carriages - Dual Fork Positioning: 50 in | Carriages - Side Shift: 50 in | Carriages - Standard Tilt: 50 in
  • Maximum: 43 ft
  • 8.16 ft
  • 8 ft
  • 11.25 ft
  • Fork Face: 20.5 ft
  • 17 in
  • Over Tires: 12 ft
  • Rated: 9000 lb | at Maximum Height - Stabilizers Down: 7000 lb | at Maximum Reach - Stabilizers Down: 2700 lb
  • 49 gal (US)
  • Carriages - Swing: 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
  • 26852 lb