Job-Site Equipment Corp.

  • 405 Nooseneck Hill Rd
  • Exeter, RI 02822
  • Call Us: (401) 785-9800
  • https://www.jobsiteequipment.com/
Print This Page

2025 Caterpillar Mining Trucks 794 AC

Information

2025 Caterpillar Mining Trucks 794 AC

What will it take to boost your bottom line? The Cat® 794 AC electric-drive truck delivers a full 320-ton payload, increased speed on grade, 40% more retarding power than competitive trucks, superior braking performance and easier maintenance. The result? High availability, more confident operators and improved productivity. The 794 features a proven electric-drive powertrain that is Caterpillar designed, integrated and supported. Validated on sites around the world, the 794 has proven its performance in a variety of applications, making it the ideal choice for a wide variety of applications. It hauls more every load, every cycle and every shift. And it delivers a better bottom line to the most important mine in the world: yours.

UP TO 8% BETTER PAYLOAD

The 794 AC has a higher-rated field payload than competitive trucks thanks to lower empty weight and higher-rated GMW.

40% MORE RETARDING POWER

Thanks to its superior retarding power, 100% anytime braking and four-corner wet disc brakes, the 794 AC boosts operator confidence and goes faster longer.

UP TO 8% BETTER SPEED ON GRADE

The 794 AC achieves top speed of 60 kph / 37 mph and is capable of traveling at a maximum 28% grade loaded.

Features may include:

Safety
  • SAFETY-INFUSED
  • — Wide field of view for greater visibility
  • — Integrated ROPS and FOPS
  • — Door sensor warning for park brake application
  • — Wide ladders, flat deck, toe kicks
  • — Integrated emergency brakes
  • — Anti-rollback(reverse shiftinhibitor)
  • — Stored energy dissipation at shutdown
  • — Traction control
  • ACCESS/EGRESS
  • Standard 600 mm (24") wide ladders, flat deck, toe kicks.
  • CONTROLS
  • The Cat drive controls feature anti-roll back, traction controls, a park brake warning when exiting the cab and an automatic retarder that inspires operator confidence and error prevention.
  • ISOLATION
  • The 794 AC features a ground level system lockout, engine lockout and propulsion lockout (in ECM cabinet), VIMS monitoring, and stored energy dissipation at shutdown. These features, and the excellent serviceability of the 794 AC, allow your technicians to perform repairs safely and quickly.
Performance
  • PROVEN AND WORKING AROUND THE WORLD
  • — Over 350,000 hours of field operation
  • — Over 5.5 million hours validation on the powertrain
  • — More than 40,000 hours on the highest-hour truck
  • — 5,300 C175 engines in operation with more than 63 million hours in machine applications
  • UP TO 8% BETTER SPEED ON GRADE
  • — Travels at a speed of 12.9 kph / 8 mph
  • — Achieves top speed of 60 kph / 37 mph
  • — Capable of traveling at a maximum 28% grade loaded
  • 40% MORE RETARDING POWER AND BEST BRAKING IN ITS CLASS
  • Boosts operator confidence:
  • — Goes faster longer
  • — 100% anytime braking
  • — Four-corner wet disc brakes with blended mechanical service brakes and dynamic
  • — Automatic Retarding Control makes retarding easier and more efficient
Integration
  • BUMPER-TO-BUMPER CATERPILLAR
  • The individual components, software, systems and engine that go inside a Cat truck have different purposes, but they have one very important thing in common: They are all manufactured by Caterpillar and supported by the Cat dealer network.

Photos

Highlights

  • Exeter, Rhode Island
  • 2025
  • Caterpillar
  • Mining Trucks 794 AC
  • /Alternator: Brushless, engine mounted, dual bearing
  • Available
  • Centerline Front Tire: 23 ft | Canopy (without optional rock deflectors): 29.75 ft | Outside Body: 29.75 ft | Inside Body: 28.08 ft | Centerline of Rear Dual Tire: 18.75 ft
  • Top of ROPS: 22.25 ft | Loading - Empty: 22.92 ft | Front Canopy Height: 26.33 ft

Specifications

  • 2025
  • Caterpillar
  • Mining Trucks
  • 794 AC
  • Mining
  • Cat®
  • Model: C175-16
  • Gross - SAE J1995: 3500 HP | Standard Gross - SAE J1995: 3500 HP | Net - SAE J1349: 3405 HP | Dynamic Retarding - Continuous: 5480 HP
  • 6.9 in
  • 8.7 in
  • 5187 in³
  • Rating: Fuel Optimized
  • Total Reduction Ratio: 35:1
  • 39 °
  • 39 °
  • Standard: 53/80 R63.
  • Standard: 53/80 R63.
  • Rated: 1800 r/min | Top - Loaded: 37 mile/h
  • Front Wet Disc Brake Surface Area: 20378 in² | Rear - Wet Disc Brake Surface Area: 30750 in² | Weight Distributions (Approximate): Front Axle-Empty - 49% / Rear Axle-Empty - 51% / Front Axle-Loaded - 33 % / Rear Axle-Loaded - 67 % | Body Raise Time - High Idle: 24 s | High Idle Body Lower Time - Float: 20 s | Total Cycle Time: 44 s
  • Pump - High Idle (HAA at 1,800 rpm): 221 gal/min | Pump - High Idle (LAA at 1,960 rpm): 240 gal/min
  • Raise: 3029 psi
  • Dump Body Plate Thickness Varies Depending on Body Selection: Flovor Plate - 0.63 in / Front Plate - 0.35 in / Side Plate - 0.31 in / Canopy Plate - 0.2 in | Rear Axle - Tail: 15.5 ft | Dump Clearance: 3 ft | Front Axle Clearance: 3.17 ft | Rear Axle - Clearance: 3.08 ft
  • Minimum: 53 ft
  • Top of ROPS: 22.25 ft | Loading - Empty: 22.92 ft | Front Canopy Height: 26.33 ft
  • Centerline Front Tire: 23 ft | Canopy (without optional rock deflectors): 29.75 ft | Outside Body: 29.75 ft | Inside Body: 28.08 ft | Centerline of Rear Dual Tire: 18.75 ft
  • Body Raised: 48.42 ft
  • 50.75 ft
  • Tire: 28.67 ft
  • 2.67 ft
  • 21.83 ft
  • Controls: IGBT Inverter Technology, air cooled, pressurized cabinet with filtration | Wheel Motor: Cat AC induction, rear axle mounted | Electric Retarding: Radial Grid Design
  • Struck: 108-133 m³ (142-175 yd³) | Heaped (SAE 2:1): 180-222 m³ (236-290 yd³)
  • Tank: 1300 gal (US)
  • Nominal: 327 ton (US)
  • Variable speed, hydraulically driven cooling system
  • Chassis: 417187 lb | Body: 62140 lb
  • Gross Machine Operating (GMW): 1150000 lb | Gross Machine Operating: 1150000 lb
  • /Alternator: Brushless, engine mounted, dual bearing