2022 Caterpillar APM Track Asphalt Pavers AP1055F

Information

2022 Caterpillar APM Track Asphalt Pavers AP1055F

OVERVIEW

The AP1055F is a high-production, rubber track paver that excels on airports runways, interstates, highways, and other large jobsites. Its high travel speed, flotation, and traction deliver superb mobility.

Features may include:

Cat C7.1 Engine
  • The C7.1 engine provides 168 kW (225 hp) and meets U.S. EPA Tier 4 Final and EU Stage IV emmision standards.
Eco-mode
  • Eco-mode utilizes an engine speed of 1650 rpm and reduces fuel burn by up to 5% over Cat E-series pavers while also lowering sound levels even more.
Automatic Engine Speed Control
  • When automatic engine speed control is activated, the engine speed is reduced to an idle speed of 1000 rpm when the propel lever is moved to neutral or to 1300 rpm when screed heat is active.
Advanced Eco-mode
  • Eco-mode and automatic engine speed control when activated together modify the engine rpm based on load factors. When activated the engine will operate at 1650 rpm when paving. If the upper power threshold is exceeded, the engine speed will increase to 2200 rpm and remain there until the demand drops below the threshold and remains there for 30 seconds, ensuring reliable performance.
Quiet Heating
  • Quiet heat mode operates at an engine speed of 1300 rpm and provides screed plate heating in under 15 minutes.
  • Quick heating mode provides a heat-up time in under 35 minutes when equipped with the 10 m (33 ft) wide-width paving package.
Temperature Ranges
  • Three preset heating options provide a wide range of temperatures for various mix designs; Low is 110 degrees C or 230 degrees F, medium is 130 degrees C or 266 degrees F, high is 160 degrees C or 320 degrees F.
Fumes Management
  • The exclusive ventilation system draws fumes from the conveyor tunnel as well as the auger chamber and redirects them away from the operator for a more comfortable working environment.

Photos

Highlights

  • Exeter, Rhode Island
  • 2022
  • Caterpillar
  • APM Track Asphalt Pavers AP1055F
  • Available
  • SE60 V Screed: 25 ft | SE60 V XW, VT XW Screeds: 33 ft | Operating - Low Entry Hopper: 142 in
  • Operating - Without Canopy: 146 in | Operating - With Canopy: 157 in | Truck Entry - With Low Entry Hopper: 20.5 in | Truck Entry - With Standard Entry Hopper: 22.5 in

Specifications

  • 2022
  • Caterpillar
  • APM Track Asphalt Pavers
  • AP1055F
  • Track
  • Gross: 225 HP
  • Cat C7.1 with ACERT
  • Maximum Travel: 9 mile/h | With Tamper Bar Screed: 82 ft/min | With Vibratory Screed: 210 ft/min
  • Maximum Throughput Capacity: 1766 tonnes/hr
  • SE60 V Screed: 25 ft | SE60 V XW, VT XW Screeds: 33 ft | Operating - Low Entry Hopper: 142 in
  • Inside: 1.5 ft
  • Operating - Without Canopy: 146 in | Operating - With Canopy: 157 in | Truck Entry - With Low Entry Hopper: 20.5 in | Truck Entry - With Standard Entry Hopper: 22.5 in
  • With End Gates Folded: 9.83 ft | With Screed End Gates: 10.66 ft
  • With SE60 XW-Series: 22.7 ft
  • With SE60 V Screed: 20 ft | Without Canopy: 10.45 ft | Canopy Retracted: 10.5 ft
  • Operating - With SE60 V Screed: 22.5 ft | Operating - With SE60 V XW, VT XW Screeds: 23.1 ft
  • Low Entry: 286 ft³
  • Tank: 92 gal (US)
  • DEF: 5 gal (US)
  • Operating - With SE60 V: 45090 lb | Tractor Operating: 37553 lb | Operating - With SE60 VT XW: 48320 lb | Operating - With SE60 V XW: 46580 lb
  • Tractor: 36804 lb